Professional AC Installation & Shifting in Mira Road & Bhayandar
Moving into a new apartment or purchased a new Split/Inverter AC? COOL N COOL ENTERPRISE provides certified doorstep AC installation, safe gas pump-down uninstallation, and complete shifting across Mira Road, Bhayandar, Dahisar & Borivali with digital water-level alignment, two-stage deep vacuuming, pure copper piping, and heavy-duty powder-coated anti-vibration brackets.
Book AC Installation / Shifting
Technician arrives in 45 mins • ₹199 Adjusted in bill
Precision AC Installation & Shifting Divisions
Executed by certified cooling engineers equipped with core drilling machines, digital manifold gauges, and high-vacuum rotary pumps.
Split AC Standard Installation & Vacuuming
Improper installation without vacuuming leaves moisture inside copper pipes that oxidizes compressor oil. We use a 2-stage vacuum pump down to 500 microns, ensuring maximum sub-zero cooling and silent operation.
- Laser Spirit-Level Indoor Backplate Alignment
- 2-Stage Rotary Vacuum Moisture Evacuation
- Nitrogen Bubble Leak Test on Brass Flare Joints
Safe Dismantling & Gas Pump-Down
Unqualified mechanics bleed expensive R32 or R410A refrigerant into the air when unmounting. Our technicians perform a professional pump-down lockdown into the outdoor compressor, saving you ₹2,000+ in refill charges.
- 100% Refrigerant Gas Saved in Outdoor Cylinder
- Copper Pipe End Caps Sealed to Prevent Dust
- Careful Dismounting with Zero Wall Plaster Damage
Heavy-Duty Brackets & Copper Piping
Coastal air in Mira-Bhayandar causes cheap brackets to rust within months. We mount heavy-gauge, hot-dip powder-coated steel stands with anti-vibration rubber damper pads and install 100% virgin Mandev copper tubes.
- Rust-Resistant Heavy MS Angle Outdoor Stands
- Heavy Rubber Anti-Vibration Pads to Stop Humming
- Thick Armaflex Nitrile Insulation Tube Wrapping
Watch How We Install & Vacuum Split Air Conditioners
At COOL N COOL ENTERPRISE, we do not take shortcuts. An air conditioner is only as good as its installation. Watch our cooling engineers mount the indoor unit with exact gravity drainage slope, drill neat core holes without cracking walls, and pull deep vacuum down to 500 microns before opening service valves.
- 100% Leak-Proof Torque Flare Joint Tightening
- Gravity Drainage Leveling to Prevent Water Dripping
- 30-Day Workmanship Guarantee on Installation
AC Installation & Shifting Rate Card
No unexpected hidden costs. Visiting inspection fee of ₹199 is 100% adjusted into your final installation or shifting bill.
| Installation / Shifting Service Scope | Estimated Cost | Turnaround Time | Action |
|---|---|---|---|
| Standard Split AC Installation (1.0 to 2.0 Ton) Includes indoor mounting, flare connection, electrical wiring & vacuuming |
₹699 - ₹899 | 60 Mins | Book → |
| Safe Split AC Dismantling / Uninstallation 100% safe gas pump-down lockdown into outdoor unit + brass valve sealing |
₹499 - ₹699 | 35 Mins | Book → |
| Complete AC Shifting Combo (Dismantle + Re-Install) Dismounting from old flat + safe re-installation at new site within Mira-Bhayandar |
₹1,199 - ₹1,499 | Same Day | Book → |
| Window AC Installation / Wooden Frame Fitting Window sill mounting, sealing gaps with foam rubber & plug testing |
₹499 - ₹650 | 40 Mins | Book → |
| Heavy-Duty Powder-Coated Outdoor Bracket Stand Rust-proof thick MS angle + 4x vibration dampener rubber pads + anchor fasteners |
₹650 - ₹850 | 25 Mins | Book → |
| 100% Pure Mandev Copper Refrigerant Piping (Per Rft) High-gauge suction & discharge copper tubes with Armaflex black sleeve & 4-core cable |
₹250 - ₹320 / ft | On Measurement | Book → |
| Precision Diamond Core Wall Cutting (Concrete / Brick) Round 65mm-75mm clean hole for concealed piping without wall vibration cracks |
₹350 - ₹600 | 30 Mins | Book → |
| Cassette / Tower / Multi-Split Commercial Installation Ceiling threaded rod anchoring, condensate drain slope testing & multi-circuit wiring |
₹1,800 - ₹3,500 | Same Day | Inquire → |
Why Professional AC Mounting Matters
Over 70% of frequent gas leaks and compressor breakdowns originate from amateur installation errors.
⚖️ Digital Spirit-Leveling
Prevents water pooling inside indoor cooling coil tray that overflows into bedrooms and damages expensive wallpapers.
💨 High-Vacuum Evacuation
Removes atmospheric air and ambient moisture from copper lines before charging gas to prevent ice choke inside expansion capillary.
🛡️ Zero Gas-Loss Pump Down
During uninstallation or shifting, our certified engineers pump all refrigerant back into outdoor condenser, saving your money.
🔇 Anti-Vibration Dampers
Heavy-duty rubber grommets placed beneath compressor feet stop annoying low-frequency buzzing resonance on your balcony walls.
🔩 Flaring Tool Precision
Eccentric 45° cone flaring tools create glass-smooth brass flare faces, preventing hairline refrigerant leaks under high operating pressures.
🔌 Correct Cable Gauge
Installation of fire-retardant 2.5 sq.mm 3-core & 4-core copper wiring to avoid voltage drop, sparking, or Inverter PCB communication drops.
🧱 Clean Diamond Core Cutting
Rotary diamond core bits create smooth circular 70mm openings without causing structural cracks or plaster peeling on walls.
📜 30-Day Fitting Warranty
Complete peace of mind. Any joint leak or alignment vibration within 30 days of installation is inspected and fixed 100% free of charge.
COOL N COOL ENTERPRISE Service Hub
Address: Shop No. 4, Mira Co-operative Housing Society, Western Express Highway, Opposite SBI, AG Nagar, MIDC, Mira Road East, Mira Bhayandar, Maharashtra 401107.
Fast Installation Reach: Mira Road East & West (Kanakia, Beverly Park, Shanti Nagar, Jangid Complex), Bhayandar East & West, Dahisar East & West, and Borivali East & West.
Service Hours: 24 Hours / 7 Days a Week • Doorstep arrival within 45 Minutes.